The Ford Edge is a crossover SUV (sport utility vehicle) that mixes metropolis-driving comfort with some usefulness associated with trucks. The Edge may be linked to a trailer through an non-obligatory trailer hitch system. You’ll be able to tow up to 3,500 kilos behind the car, while nonetheless having enough power to succeed in freeway speeds. You have to to put in the trailer lights by using the trailer connector earlier than you start your trip.
Ford Edge Trailer Lights Installation Instructions
1. Establish a trailer that will work along with your Ford Edge. The manufacturing unit trailer bundle on the Ford Edge includes a 4-pin connector that you’ll use to put in the trailer lights. When renting or purchasing a trailer, the hitch must match the ball on the trailer hitch and should have a 4-pin connector to work together with your vehicle.
2. Connect the trailer to the hitch on the back of the Ford Edge. Do that by positioning the trailer close to the hitch and lifting the connector up and over the ball on the hitch. Tighten down the connector screw on prime of the hitch connector till the hitch is secure.
3. Plug within the power connector from the trailer to the port close to the trailer hitch at the rear of the Ford Edge. Turn the connector in order that the 4 pins line up with the 4 ports inside the power connector input. Push the power connector till it clicks and pull it aspect to aspect to ensure it is not going to fall out while towing.
4. Test the trailer lights. Have one other particular person watch from behind as you drive the Edge with the trailer attached by a parking lot. If correctly installed, the trailer lights will turn on while you brake and once you use the flip indicators from inside the Edge.
